Cutting platform to single point conversion kit (without reel fore and reel aft)
$1,286.00
Description
The LAN84152 converts John Deere® cutting platform heads prior to 600 Series (without reel fore and reel aft) to John Deere® 60 and 70 Series combines.
To remove the electric harness from this kit, order the LAN84152NE.
Additional information
| Weight | 35.0 lbs |
|---|---|
| Dimensions | 17.0 × 17.0 × 10.0 in |
Videos
You may also like…
-
Green coupler for reel lift function
$146.05 Add to cart -
Red coupler for reel drive function
$146.05 Add to cart -
Yellow coupler for reel return function
$146.05 Add to cart -
Single point hydraulic and electric kit for cutting platforms with reel fore and reel aft
$1,573.00 Add to cart -
Coupler block storage bracket with hardware
$48.30 Add to cart -
Electrical adapter for 31 pin on header to 31 pin single point on combine
$485.30 Add to cart -
Cutting platform to single point conversion kit (without reel fore and reel aft)
$984.75 Add to cart -
Single point block with reel drive, reel return, and reel lift
$616.00 Add to cart
Related products
-
Cutting platform wedge kit, 4½ degree angle addition
$1,950.00 Add to cart -
Replacement gearbox for John Deere® 40 and 90 Series corn heads
$1,972.00 Add to cart -
Cutting Platform Wedge Kit, 1 Degree Angle Addition 992-LAN84211-1.5
$876.75 Add to cart -
Single point hydraulic for cutting platform with fore and aft
$1,140.00 Add to cart
