Bish Enterprises
Frequently Asked Questions
Looking for something specific? See the FAQs on our Header Adapters and Implement Mover pages.
Where is Bish Enterprises located?
Bish Enterprises is at 508 S. D Road, Giltner, Nebraska 68841. We build and test our equipment there. Call 833-856-1110 or 402-849-2674, or email sales@bishcom.com.
Do you ship parts across the US?
Yes. We ship web orders to farms and dealers nationwide and have sent orders to 40 states, most often Nebraska, Illinois, North Dakota, Iowa, Minnesota and South Dakota.
Do you make hemp harvesting equipment?
Yes. Through Hemp Harvest Works, Bish Enterprises builds the FiberCut for fiber hemp, the SuperCrop header (also used by sorghum growers) and the Bish Decorticator. Contact us with your acreage, crop and location for pricing.
Do you sell flag pole mounts for combine unloading augers?
Yes. We carry flag pole mounting kits for John Deere high-unload-rate (HUR, 17") and non-HUR (13.5") auger tubes, CNH combines with 14" and 12.75" auger tubes, Case combines with 15.5" tubes, CLAAS Lexion combines with 16.5" tubes, plus a universal flag pole mount.
Do you sell display mounts and cab storage for John Deere tractors and combines?
Yes. Our best sellers include the John Deere 2600 and 2630 display mount (992-LANMBJD101), cab corner cubbies for John Deere 7, 8 and 9 R-Series tractors and R-Series sprayers, an integrated display mount for John Deere S Series combines, CB and mic mount kits, and cab corner cubbies for John Deere 6R, Challenger MT, Case IH Magnum and New Holland T8 cabs. We also sell combine footrests and toolboxes.
Do you have Category 5 to 4 or Category 4 to 3 drawbar adapters?
Yes. We sell Category 4 to 3 drawbar adapter bushings (upper and lower), a Category 4 to 3 hitch pin reducer kit, and Category 5 to Category 4 drawbar pin conversion kits, including one for Case IH. We also carry solid, folding and telescoping combine hitches for John Deere and Case IH combines.
Do you sell corn head wear parts?
Yes. We carry Stalk Stomper poly skid pads and mounting kits, Polytin wear tips (plastic and cast), stainless steel snout and divider wear strips for 30" John Deere corn heads, stalk roll knife kits, gathering chains, idler supports, ear saver kits for John Deere and Case IH, and stainless steel corn hood cover plates.
Do you sell bean savers and unloading auger extensions?
Yes. We sell bean savers for John Deere 600, 700 and RD Series flex draper heads and for Case IH and New Holland auger heads, unloading auger extensions for Case IH and John Deere 60, 70 and S Series combines, and a non-HUR unloading auger grain saver door kit.
Do you sell single-point coupler blocks and repair parts?
Yes. We stock single-point coupler blocks for Case IH and New Holland platforms and CNH corn headers (2012-and-older and 2013-and-newer versions), complete John Deere single-point blocks, John Deere combine single-point Faster alignment pins (992-LANKITGP3PLK), alignment pin kits for Faster header single-point hydraulic blocks (992-LAN24587K), ½" and ⅜" coupler O-ring seal repair kits (992-LAN166987 and 992-LAN166988), Faster valve seal kits, Multifaster cartridges, locking collar replacement kits, backing rings and Parker single-point block dowel pins.
Do you have single-point hydraulic kits for John Deere corn heads?
Yes. We sell a single-point hydraulic kit for John Deere corn heads (992-LAN84108NE) and a version for John Deere corn heads with a corn reel (992-LAN84108RNE).
Do you sell feeder house hooks and dummy plugs for John Deere combines?
Yes. Bish Feeder House Hooks convert John Deere 20 Series and 50 Series bump-style feeder houses to 60 Series hooks (sold as a pair). We also sell corn head, draper head and pickup head dummy plugs for John Deere 50 and 60 Series combines.
Can you supply a specific part or shaft I can't find on the website?
Send us the part number, or the spline and hex sizes and the length you need, and we'll let you know what we can supply.
Still have a question?
We’re happy to help. Call 402-849-2674 or email sales@bishcom.com.