Platform Wedge Kit for John Deere® 600 Series Header (All Degrees) – 992-LAN84398
$1,454.25
Description
The LAN84398 enables you to adjust the cutter bar angle on your John Deere® 600 Series platform header. This kit contains three different wedge angles; 1_, 3, and 4_ degrees.
- For the 1_ degree wedge angle only, order the LAN84398-1.5
- For the 3 degree wedge angle only, order the LAN84398-3
- For the 4_ degree wedge angle only, order the LAN84398-4.5
Additional information
| Weight | -1 lbs |
|---|
Videos
You may also like…
-
Platform Wedge Kit for John Deere® 600 Series Header (1 Degree) – 992-LAN84398-1.5
$582.25 Add to cart -
Platform Wedge Kit for John Deere® 600 Series Header (4 Degree) – 992-LAN84398-4.5
$872.75 Add to cart -
Platform Wedge Kit for John Deere® 600 Series Header (3 Degrees) – 992-LAN84398-3
$727.25 Add to cart
Related products
-
Cutting Platform Wedge Kit with 1, 3, and 4 Degree Angle Additions – 992-LAN84211
$1,811.25 Add to cart -
Single Point Hydraulic and Electric Conversion Kit for John Deere® Draper Heads – 992-LAN84112
$1,640.00 Add to cart -
Multi-Point Header Adapter – 992-LAN84206NE
$770.00 Add to cart -
Cutting Platform to Single Point Conversion Kit (without Reel Fore and Reel Aft) – 992-LAN84152
$1,224.75 Add to cart
